New Mercedes-Benz Arocs 3251 Cabin Spec FASSI F710RA.2.26 XHE-Dynamic Truck

MERCEDES BENZ AROCS 3251 L ENA 8X2/4

NEW MERCEDES-BENZ AROCS 3251
F710RA.2.26 XHE-DYNAMIC


Gross Vehicle Weight: 32,000kg
Unladen Weight: 22,140kg
Chassis Warranty: 1YR MB WARRANTY, 2YR MB DRIVELINE
Crane Warranty: 1YR PARTS & LABOUR
3YR ON STRUCTURAL COMPONENTS
Body Warranty: 1YR PARTS & LABOUR
3YR STRUCTURAL
Crane R&M: FULL R&M FIXED TERM CONTRACTS AVAILABLE
Purchase Price: £299,995 + VAT
Call for Lease Price 07900 682 202

REGISTRATION: SG74DLF
MERCEDES-BENZ AROCS 3251 L ENA 8X2/4
Gross Vehicle Weight: 32,000kg
Cab: L-cab StreamSpace, 2.30m, tunnel 170mm
Wheelbase: 6050mm
Colour: MB 7708 Silver Grey

Key Features
Euro VI, E Engine
Arocs Model Generation 5
Mercedes Powershift 3 Gearbox
Powershift Advanced
DAB Radio
Truck Data Center 7
Multimedia Cockpit
Cruise Control
Lane Assist
Attention Assist
Active Brake Assist 5
Air Con
Navigation System
Leather Seats
Co-driver Suspension Seat
Luxury Bed
Hot Water Cab Heater
Pull-out Fridge
Tilting Electric Sunroof
9T Front Axle
9T Lift and Steer Axle
VBG Coupling
Sunvisor
Mirror Covers
LED Daytime Running Lights
LED Main Headlights
Hologen Foglamps
Headlamp Cleaning System

Crane
F710RA.2.26 XHE-DYNAMIC CRANE
FITTED WITH FSC S11 STABILITY SYSTEM
Remote Control: Scanreco V7S 6 Function
Lighting: 2x Work Lights on Outerboom
Safety: LED Warning Lights On All Stabilisers
IOC: Internet of Cranes 1 Year Package

Full Body Specification
PMH FLAT BED CABIN SPEC BODY
TWISTLOCKS TO SUIT 20' , 24' & 30' CONTAINERS
Sub-frame Heavy duty steel box section crane runners and 100x50x3mm galvanised
channel crossbars spaced at 350mm centres and welded to crane sub-frame.
Side Raves 150x75mm x10mm H/duty steel rolled channel side raves.
Load Restraint Rope hooks fitted to every crossbar including front and rear.
Five h/duty 3.5T rated recessed lashing rings spaced evenly down sides.
Five Heavy duty 12T floor mounted lashing rings per side.
Front Bulkhead 1100 high headboard, fabricated from heavy-duty steel sections with chain
storage hooks incorporated.
3 stage ladder mounting pins on top of bulkhead.
Floor 28mm Keruing hardwood floor double screwed to crossbars.
Type approved and fitted to legal requirements.
Side Guards Anodised aluminium side guard rails with hinged support stays to allow
access into batteries etc and all fitted to legal requirements.
Rear Underun Special hinged rear under run to suit drawbar trailer spec.
Marker Lights LED type. Fitted to legal requirements.
Reflective Tape Reflective conspicuity tape on cab and body work to comply with ECE1 04
specification.
Side Landing Lights Four LED side spot lamps with cab switch.
ISO Twist Locks Six of ISO twist locks to suit 20', 24' and 30' container configuration. All
wist locks on manual sliding channels to suit over width containers/cabins.
Safety Hand Rails Side rave sockets with removable posts and pull tight double hi-viz strap
handrails.
N/S pullout access ladder.
(Storage for posts) Chain Trays O/s and n/s chain trays behind front bulkhead.
Work Lamps Two LED spot lamps fitted to bulkhead with cab switch.
Pullout Side Markers Front and rear pullout marker hot dipped galvanised arms with
chevrons and LED lights.
Ferry Rings Six ferry lashing rings fitted in suitable positions.
Strobe Hazard Lights Four LED amber strobe hazard lights fitted front and rear with isolator
switch in cab.
Roof Beacon LED x 1
Rear Light Extension Support Beam Hydraulic rear pullout light extension beam. Operated
by double acting 2mtr ram complete with rear light clusters and markers.
Drawbar Towing Coupling 57.5 mm Air operated VGB underslung rear tow hitch with support
beam,side mounting plates, flitch plates, suzies and electrical sockets.
Special VBG EC hinging rear underun bar.
Alter rear chassis to accommodate draw bar. Reposition rear truck lights to suit coupling.
Test & Certified Vehicle body tested and supplied with IVA certificate.
Final Inspection All moving components ok and operational. Approval check.
Overall height decal in cab.
Painting Prime and paint body & sub frame one colour to customers spec.
Mud Wings 3mm aluminium tread plate folded mud wings fitted to 3x axles with spray
suppression flaps.
Tool Box's 2x stainless steel toolbox's to suit available space in chassis.
Crane Pad Carriers Fabricated galvanised steel single pad carriers to suit chassis location.

EXEROS Technologies DVS Gold HD Camera System

Price on application

STOCK #: ALLTRUCK-526
REGISTRATION: SG74DLF
MANUFACTURER: MERCEDES BENZ
MODEL: AROCS 3251 L ENA 8X2/4
Weight: 32000kgs
CRANE MANUFACTURER: FASSI
CRANE MODEL: F710RA.2.26 xhe-dynamic
EURO CLASS: Euro 6
Engine size:
BHP: 510
MOT Expiry:
Cab Type: Sleeper Cab
Gearbox Type: Automatic
Body Type: Cabin Spec Flatbed
Axle Configuration: 8x4
Wheelbase Length: 6050
Mileage: 500
Colour: Grey
NUMBER OF OWNERS: 0
FUEL TYPE: Diesel

CONTACT US TODAY